Installation of your LED trampoline lights will look different depending on the lights you went with, as well as the trampoline they are for. LED Lights for trampolines can be for the rim of a safety net, lights to go along the trampoline frame, or lights that go under the mat and along the retaining wall.
Steps for Installing LED Trampoline Lights
The first step in installing any LED light system is knowing which system you have. Many systems come with instruction manuals and clear direction on each step of installing the system. However, here are a few helpful tips and steps for installing your LED trampoline lights, no matter which system you use.
Locate your power source
Whether this is a lighting system for an above ground trampoline, in-ground trampoline, or mini trampoline, you will need a power source for your lights. You will also likely need an extension cord to get the power from the source to your trampoline.
Ensure you have all the proper tools
Most kits will come with all the parts to install. However, if you’ve got a quality system it may need other equipment to ensure the installation is secure. In most cases it will be helpful to have a power drill, preferably cordless
Measure your trampoline
Many LED trampoline light systems come with hooks or zip ties to secure the lights to the trampoline. Make sure you measure the perimeter of your trampoline to know how far apart each securing mechanism should be. It is also helpful to take into account that if you will be securing a strip around one of the trampoline frame poles, it will be best to have the securing mechanisms closer to both sides of the pole to keep the strip held tightly to the frame.
Prepare the trampoline
Depending on how your LED lights are meant to be installed, the trampoline may need to be partially deconstructed (i.e pad, springs, and mat will need to be removed). If this is the case, be prepared to remove the springs with gloves or with assistance as this can be a difficult process.
Read the manual
As previously mentioned, most LED trampoline light systems will come with a manual or instructions on how to install them. For a smooth installation, this should be read thoroughly and kept handy throughout the installation. If there is not a physical manual included, there are other online resources, guides, and images for how many systems should be installed.
Other Helpful Tips for LED Trampoline Light Installation
Before installing LED lights for your trampoline, you should know some of the problems people often have with LED lights. Some common issues people run into are frequent breakdowns, poor light distribution, electrical supply overload, or loose and exposed wires. When installing LED lights on your trampoline, measures can be taken to minimize risk of these and similar issues. Finding the right system and brand is one thing you can do to prevent these drawbacks from happening. You can read about the benefits of a TDU LED trampoline lighting system here.
Following the instructions you receive from the light system manual also decreases risk of improper function of your LED lights. Prior to installation, inspect the product to ensure there are no loose wires and that everything is intact. Handle the lighting strips with care as not to damage them during the installation. Manuals will often state a recommended voltage or current to power the LED lights. This will minimize the risk of system failure and dim lights. It is also advised that you measure your spacing between lights or securing mechanisms while installing them to get the desired look to your lights.
Last of all, make sure you enjoy your LED trampoline lights! They transform the experience of jumping on a trampoline, especially in the dark. You can’t go wrong with fun trampoline accessories!
